Tip Top Temp

Welcome to the next step in charcoal and solid fuel grill temperature control.

When you need accurate temperature control over long periods, use the TipTopTemp. Ideal for “low and slow” BBQ cooking.

Use it to help control smokers as well.

TipTopTemp works by controlling the air flow to the fuel. Turn the knob to the desired temperature setting, light 4-6 charcoal briquettes completely and place them in the centre of the charcoal grate.

Pile 15 -20 charcoal briquettes or equivalent lump charcoal around and on top of the 4 -6 lit briquettes. Put the cooking rack in place and food on the cooking rack. Put the lid on and walk away.

The internal diameter of the Tip Top Temp is 127.5mm (5 inch)

Download the instruction sheet.

Works great on kettles, Kamados (including steel kamados) and smokers.

Shown here using a plate hanger (not Included) to attach securely to a Kamado.

Download the instructions from HERE.

Second Generation Tip Top Temp

The USA made T3 is made of heavy gauge plated steel and has a hardwood knob.

The knob can be personalized with a graduated decal or favourite temperature marked by the customer.

The T3 can be used as a single 3″ID or 5″OD assembled unit with a twist, locking the two pieces together.

The only difference between the packages is the included accessory.

Each package has the same TipTopTemp device.

The fragile plastic knob on the original version is now obsolete and is NOT included in the new version.

T3 Kettle kit

The T3 Kettle Kit is a pre-packaged TipTopTemp and includes retaining clips designed to slide under the Kettle daisy wheel vent.

The free end of each clip is pinched between the TTT base and red gasket to secure the device to the grill lid.

Designed for Weber steel kettle style grills.

Weber Kettle Retaining Clip

Kettle style retaining clip slides under the OEM vent and secures the TTT from the side.

Place 5/8 red gasket/band on the outside of the for extra holding power. Four clips per set.

Ceramic 5F

The Ceramic 5F is a pre-packaged TipTopTemp and includes a wire ‘hanger’ to secure the device to 5″ fixed vents.

Designed for the standard Akorn grills.

Akorn/Kamado hanger

Use the plate hanger to secure the TipTopTemp to the Akorn grill and other kamado chimneys

The TTT Ceramic kit includes the Plate Hanger

Large Chimney Adaptor

This silicone gasket allows the TTT to fit 6 inch (152 mm) vents while holding the TTT tight enough the lid can be opened without fear of losing the controller.

Small Chimney Adaptor

This silicone gasket allows the TTT to fit 4 inch (102 mm) vents while holding the TTT tight enough the lid can be opened without fear of losing the controller.

The plastic handle on the vent needs to be removed.

This is easy and quick, you can see instructions on this YouTube page.

BGE/Kamado Wide Gasket

Extra-wide 2-inch band for the Big Green Egg and other 5-inch chimney vented grills.

Additional information

Weight	.3 kg
Dimensions	15 × 15 × 6 cm
TTT	Tip Top Temp Kettle, Tip Top Temp 5F Ceramic, BGE wide Silicone Band, Weber Kettle Clip set, Akorn Spring Clip, Small Chimney Adaptor, Large Chimney Adaptor, Replacement Silicone Band